How to Maintain Your Metal Shear for Maximum Efficiency

Metal shears are essential tools for cutting various types of metal materials. This is particularly useful in areas such as factory, construction site and workshop. your metal shears need to be sharp so that cut well and they also should make clean, accurate cuts on the stainless steel. If your shears are dull, cutting metal can be difficult at best; often it is next to impossible. Excelsior offers tips to taking care of your Metal Shear and keeping them in good condition. 

Use A Sharpening Stone

Another tip on how to keep metal shears by Jiangyin Metallurgy sharp would be using a sharpening stone. These stones are readily available at hardware stores or you can buy them online. If you use a sharpening stone, lay the shears blades flat on it and rotate in small circles. As you do this, keep the same angle and apply even pressure. This way, one can get the two side of the blade at a same measure. Take 4-5 minutes on each side for sharpening so that it makes up the equal ends to be perfect sharp. 

Keep your Shears Clean

A clean metal shear is a happy and healthy set of shears. They breed sharpness and also help resist bluntness. When you clean the shears after use, wipe them with a dry cloth to remove any dust or metal particles or water. If there are any particularly difficult-to-remove wine stains, a little bit of soap mixed with water should do the trick. Because, if you leave your shears dirty or wet too often, it can result in dull blades and even corrosion over time. 

Keep your Shears Dry

One of the main causes for rusted and blunt metal shears is moisture. After cleaning your metal shears, rinse thoroughly to remove any soap residue and dry. Never leave your shears wet or in a humid area. If you can put them in a toolbox or container box sort, it allows to secure and hold off air moisture. 

How To Keep your Metal Shear Working Great

If you want your metal shear to continue to work at its best, maintenance is key. Cleaning and lubricating your shears on a regular basis keeps them running smoothly which could save time instead of having the blade go jammed up. 

Lubricate your Shear Blades 

A nominal but important step in the maintenance of your metal shears is oiling the cutting blades. It's really important to oil your metal shear machine -- it helps you get a very clean, smooth cut and lengthens the life of them too. you can also use light oil (like WD-40) for this - Apply a small amount of oil on both sides of the blade, then move and position the blades back and forth for at least 3 minutes to properly soak in. This can help keep the shears from becoming dull over time friction, making them easier to use. 

Keep your Spring Clean

Importance of Spring In your Metal ShearThe spring in your metal shear is crucial since it allows the blades to open and close smoothly. To be able to the spring you need it clean. Take a small brush to clean any dirt or grime that has accumulated on the spring. Make it a point of brushing thoroughly and wipe with an equally clean piece thereafter to remove all debris from its surface. 

How Can you Protect your Metal Shear From Rust

Because the metal is iron, corrosion happens in no time and it affects their efficiency if you let them rust. Some of the golden steps to prevent them from rust and corrosion are as follows: 

you should keep your shears in a cool, dry place. 

Rusting frequently happens because of moisture. Always keep your metal shears in a dry moisture place free and will save the metal from rust. One way to prevent your sheet metal shear from getting wet or breaking is to put the storage box. 

Apply a Protectant

A protectant to apply on your metal shear blades will likely help with corrosion and rust prevention. If you are worried about it, or seeing carnival glass-like colouration then try oiling them bare minimum - like WD40 kind of commercial stuff alternative a thin coat of vaseline However, you need to ensure that shears are not too lubricated with the protectant prior to putting them away 

Clean your Shears After Use

Cleaning your Metal Shears Clean your metal shears after every use Use a clean cloth to clear the blade of dirt and water. Wash them with a bit of soap and water if they have come in contact with some dirt. Do not put your metal shears away until they are completely dry so as to avoid any rust. 

Proper Use and Care Gravity Boxes

Looking after your metal shear is one of the most important methods in helping it last longer as well as work beautifully. These are a few best practices of using and handling the metal shearudad

Cutting with your metal shears

Ensure that your metal shears are reserved for metal cutting only. They can ruin the blades, making them useless on any surface such as plastic or wood. Make sure all materials for cutting are correct to avoid unnecessary damages. 

Use Protective Gear

If you must use metal shears make sure to wear gloves and goggles. Always be sure to put on these safety tools which will help decrease the chance of an accident as well in keeping you safe while working. 

Store your Shears Properly

Properly store your metal shears together closed uniformly. It uses less likelihood for unwanted clipping thereby preserving the condition of such shears. Make sure to always keep your shears free from moisture and everything else that might scratch them forever.